PA7 LED Bollard Path Light

Body

Thick-walled cast C84400 bronze housing attaches to mount base using black oxide coated 18-8 stainless steel hardware.

Mount Base

Machined C36000 brass mount base comes in two styles: Surface Mount and Stake Mount.

Faceplate

Cast C84400 bronze faceplate is pressed on to a machined, black anodized, 6061-T6 aluminum cap, which is attached to the Lamp Holder. Seal between cap and faceplate is a high temperature silicone O-ring. A 1/8” thick, tempered, clear lens, is secured to the faceplate with a high temperature, UV curing, silicone adhesive for a water tight seal. The faceplate accepts up to two internal lens accessories, held in place by a stainless steel clip.

Cutoff Cover

Cast C84400 bronze cover comes in two cutoffs. An optional 1/8” thick, Ø2 1/2” spread lens is secured to the cover and allows maximum light distribution. The cover is mounted to the faceplate using three 18-8 stainless steel set screws. The cover can be mounted on the faceplate and rotated to align, as desired.

Lamp Holder

The machined 6061-T6 aluminum, black anodized lamp holder contains the Light Engine and attaches to the faceplate cap using one 18-8 stainless steel set screw.

Finish

TGIC thermo-set polyester powder coat paint available in 14 standard colors. Available in two additional metal finishes: Natural and Aged.

Socket

GY-6.35 porcelain socket with 600V, 250°C, PTFE coated 18 ga leads (for MR16 Halogen and MR16 LED options).

Light Engine

Integral Driver COB LED: 13.5mm COB LED and integral low voltage driver allows for choice of light output (400lm, 700lm, or 1000lm), color temperature (2700K, 3000K, 3500K, 4000K), CRI (80, 90), and optics (15º, 24º, 36º, 55º, 65º). Integral LED driver features include: 12VAC input (+/- 10%), ELV and MLV phase dimming (contact V3 for dimmer compatibility), high power factor > 0.9, internal protection (short circuit, overload, thermal, auto-reset), and an L70 > 40,000 hrs. COB LED and driver components are field replaceable and upgradeable to simplify future repairs and upgrades.

MR16 Halogen: 12V bi-pin up to 50W. Lamp supplied by others.

Retrofit MR16 LED: 12V 7.5W (600lm) bi-pin retrofit Soraa™ MR16 LED lamp with specially engineered heat sink mount to ensure proper heat transfer to body. Note: Retrofit LED will overheat without supplied heat sink mount.

Certification

CSA tested & certified to US and Canadian safety standards for the following applications:

Wet location landscape use (UL1838):
PA7B - 50W Max. MR16 Halogen lamp.
LED options can be used in all models and applications.

Caution! - Higher wattage lamps may be unacceptable or harmful in certain applications. Consult the surface temperature table on the specification sheet before choosing a lamp suitable for your application.

All ratings subject to change without notice. See website or contact V3 for most current info.