MO10 Tree Mount Canopy

Tree Mount Canopy

Tree mount canopy for screw/nail on tree mounted lighting applications. Can be used with low voltage lighting fixtures for surface mount installations. Large size canopy can accommodate wiring connection using waterproof wire nuts.

  • Accepts lighting fixtures with 1/2” NPS thread mounts.
  • Easy feed-thru of 12-2 low voltage cable.

  • WRITTEN SPECIFICATIONS

    Canopy:

    Machined 6061-T6 aluminum, C36000 brass, or 304 stainless steel.

    Fixture Mount:

    Ø7/8” non-threaded fixture mount hole.

    Mounting:

    Two mounting holes, 2” on center, for mounting machined tree canopy to a tree (hardware not supplied).

    Finish:

    TGIC thermo set polyester powder coat paint available in 14 standard colors. On aluminum model, finish is applied over a corrosion resistant, hexavalent chromium free, RoHS compliant coating. Aluminum model available in one additional metal finish: Clear Anodized. Brass model available in three additional metal finishes: Natural, Polished, and Aged. Stainless steel model available in three additional metal finishes: Natural, Polished, and Brushed.

    Electrical:

    For use with low voltage lighting fixtures only. Requires the use of a remote transformer.

    Certification:

    CSA tested & certified to US and Canadian safety standards for wet location use.

  • Downloads

    Type Name File size
    MO10 Specification Sheets 430.5 KB
    MO10 Installation Instructions 333.4 KB

  • Photos