FL3 Rear Mount LED Flood

Light Engine:

Both COB LED light engine options use industry standard replaceable components and quick disconnects for ease of field maintenance and future upgrades, and includes features like: field changeable optics (15º, 24º, 36º, 55º, 65º), choice of color temperature (2700K, 3000K, 3500K, 4000K), CRI (80, 90), and an L70 > 50,000 hrs.

Integral Driver COB LED option: Includes a field replaceable driver module with a 350mA, 15W max. Class 2 driver for features like: 1600lm max. nominal output, 105 lm/W efficacy, 120-277VAC (50/60Hz) input, programmable tri-dimming (TRIAC, ELV, 0-10V) down to 1%, and various protection features (input over current, short circuit and over current, internal over temperature, output open load). Notes: driver can be programmed for dimming profile or lower lumen output. Contact V3 for info. For compatible dimmers, see Compatible Dimmer list.

Remote Driver COB LED option: Requires Vision3 approved constant current remote driver or driver mount (to be specified separately). Includes performance of 1800lm @ 350mA, 2400lm @ 500mA, 3200lm @ 700mA. Note: see specification sheet of driver mount being specified for appropriate driver ratings.

Certification:

CSA tested & certified to US and Canadian safety standards per UL1598 for wet location use in landscape, wall mount, and ceiling mount applications.

Integral Driver COB LED:
Integral driver COB LED available in all configurations.
Remote Driver COB LED:
FL3(A or B) - 700mA max driver current.

Body:

Machined 6061-T6 aluminum or C36000 brass body with 18-8 stainless steel hardware.

Knuckle:

Machined 6061-T6 aluminum or C36000 brass mounting knuckle with a 1/2” NPS threaded male fitting allows a full range of mounting positions. Double taper design (U.S. Patent #6,966,679) allows fixture to hold position during aiming and ensures a solid lock when tightened. Integral high temperature silicone O-ring prevents leaking between body and knuckle. LED models have a molded silicone wire seal to prevent water entry at knuckle. Available Rotate and Lock option (U.S. Patent #7,108,405 & #7,458,552) allows for full 360° horizontal aiming and locking.

Cap:

Machined 6061-T6 aluminum or C36000 brass caps come in seven styles, lock in place with one 18-8 stainless steel set screw, and are sealed to the body with a high temperature silicone O-ring. Regress Lens cap has drain hole for water drainage from top of lens if mounted in the up position. All caps accept up to two internal accessories, held in place by a stainless steel clip.

Finish:

TGIC thermo set polyester powder coat paint available in 14 standard colors. On aluminum model, finish is applied over a corrosion resistant, hexavalent chromium free, RoHS compliant coating. Aluminum model available in one additional metal finish: Clear Anodized. Brass model available in three additional metal finishes: Natural, Polished, and Aged.

Lens:

1/8” thick, tempered, clear lens, secured to cap with a high temperature, UV curing, silicone adhesive.